Multi-Mixing Head Polyurethane Mixing Machine Configured with Graphite Colorant AIA-1 manufacturer from China HuizhouHeChen Mechanical Equipment Co.,Ltd.

Multi-Mixing Head Polyurethane Mixing Machine Configured with Graphite Colorant

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Maybe you haven't known about me - ,

but you might have used products

made by my Mixing Machine

Multi-Mixing Heads Polyurethane Mixing Machine Configured with Graphite Colorant

Preface

HC-207 Series — Car Roof PU Injection Equipment / PU Mixing Machine

The set of Car Roof PU Injection Equipment / PU Mixing Unit is designed to manufacture inner decoration parts for automobiles, high-speed trains, aviation cabs. Controlling by central computer PLC, Foaming Equipment automatically doses and blends materials, additives respectively according to the set flow rate, ratio, pressure and time, then the blended materials will be sent into an automatic compression foaming box to rise and foam.

This set of Car Roof PU Foaming Equipment was designed and fabricated for international manufacturers producing inner decoration parts for automobiles. As a fully automatic PU foaming production line, perfect blending effect, this automatic PU foaming equipment line is applicable for various recipe of PU materials, different PU foaming machines. With high quality and competitive price, this model has been sent to several overseas markets, Europe and America are included.

The foam block will be automatically handled to cut, and then composed, and sealed in accordance with the required size and packed as the needed decoration parts.

Working Condition:

Configurated with a total of 4 mixing heads (2 iso + 2 polyol), 2 foam heads now + 2 heads in the near future, the type HC-201 series high pressure foaming machine is applicable for ISO and POLY two components. This foaming line can fulfill production requirements of four sets of hydraulic mould carriers.

The Foaming Unit consists of handling unit, cutting unit and molding unit, as well as

Servo motor, basement unit

Electric control unit

PLC procedure module, modification unit

MACHINE DESCRIPTION

Suitable Foaming Type Hard , Semi-Rigid, Flexible PU foam, 2 components
Mold Temperature 40 –70 C (+/-1 C). The upper and lower tool are both
equipped with a TC. Temperature can be set separately.
Processing Close tool
Output capacity 50-200g/s. The machine shall be able to feed simultaneous 2 tools
Output Ratio 1:5—5:1, it could be adjusted
Pouring time 0.5-99.99s(+/-0.01s)
Pouring control Both Manual and Automatic
Voltage 380V/50Hz
Power 28Kw
Air supply 6 bar
Space for installation Length 4000mm, Width 1600mm, Height 3800mm;

Metering System

Iso Pump C07 High pressure axial piston pump- Rex
Poly Pump C07 High pressure axial piston pump- Rex
Iso Frequency Motor with transducer Speed 0-1450rpm; Power: 380V/50Hz, 5.5
Poly Frequency Motor with transducer Speed 0-1450rpm; Power: 380V/50Hz, 5.5
Iso mechanical Coupling Shall be installed to avoid Material leakage
Poly mechanical Coupling Shall be installed to avoid Material leakage
Iso Flow rate controller Range:0.5-70L/min, Accuracy: +/-0.5g

Material Viscosity:

POLY: 2500MPas
ISO: 1000MPas

Pouring rate: 50~250g/s
Mixing ratio: 5:1~1:5 adjustable
Pouring time: 0.50~99.99s(accuracy 0.01s)

POLY metering unit: 2sets
Metering Pump: A7VKO028MA/10MRSK4P550

ISO metering unit:
Metering Pump QTY: 2sets

High pressure mixing head: 2sets