Hydraulic PU Moulding Machine Moulding / Polyurethane Casting Machine AIA-1 manufacturer from China HuizhouHeChen Mechanical Equipment Co.,Ltd.

Hydraulic PU Moulding Machine Moulding / Polyurethane Casting Machine

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Maybe you haven't known about me - ,

but you might have used products

made by my Laminating Machine

Hydraulic PU Moulding Machine Moulding / Polyurethane Casting Machine

Preface:

HC-206 Series —

Hydraulic Pu Moulding Machine For Automobile Inner Decoration Parts Production Line

The standard mould carrier 2100x1400mm is designed to foam the backside of parts with Polyurethane such as Dash inner, tunnel, half carpet or other part which max dimensions are approx.1800x1100mm.

This mould carrier is designed for high volume production (improved cycle time).

It is usually implemented in line with other similar mould carrier to share operation work-content.

Applicable scope:

Car steering wheel, seat, instrument panel, ceiling/ roofing, carpet, sound insulation pad, filter, front dash, and so on.

When the manufacturing line of automobile inner decoration parts was successfully integrated with the latest CO2 PU foaming technology, we have set a new record in upgrading automobile production technology by ensuring it with energy conservation, low carbon but high quality.

Technical Parameters:

Closing force	400 kN
Opening force	40 kN
Maximum weight of upper tool:	3 To
Maximum total tool weight:	6 To
Use of the mould carrier	Up to 24 hours/day – 7 days/week
Opening	60°
Closing Stroke	500 mm	20 in
Maximum Daylight	1350 mm	53 in
Minimum Tool height	850 mm	33.5 in
Height of lower platen / ground	400 mm	16 in
Height of lower platen / ground	(without any foundation)
Upper platen stroke when open	500 mm	20 in
Platen size	2100 x 1400 mm	83 x 55 in
Mixing heads in upper plate	1 or 2 (to be specified at order)
Opening in upper plate	1200 x 600	47 x 23.5 in
T slots in Lower & Upper platen	T-slot 18 DIN 650 (See drawing)	¾ in
Flatness of platen	± 0.2 mm / m	±0,008 in
Max platen flexion under full load	0.2 mm/m	0,008 in
Max platen flexion under full load	0.2 mm/m	0,008 in
Max platen flexion under full load	applied on 2/3 of the surface
Closing time	10 sec
Opening time	10 sec
Hydraulic oil cooling	Oil / Water heat exchanger
Retention box	Oil retention box under the hydraulic power unit and all isolated hydraulic component
Front access	Protection by safety light barrier
Back access	manual door with safety switches

Applicable Products:

Roof insulation sandwich panel
Wall insulation sandwich panel
Floor insulation sandwich panel
Phenolic sandwich panel
Polyurethane sandwich panel
Thermo insulation PU sandwich board

Successful Case of Hydraulic Pu Moulding Machine :

Development theme:

With the globalization of the international automobile industry, automobile industry in our country is developing by leaps and bounds. Supported by all these years cooperation with overseas automobile companies, we have introduced European standards in large scale manufacturing quality inner decoration parts for automobile industry, which not only catered the domestic market demand on automobiles inner decoration parts, but also highly consumed by global auto industry powers, such as